Description
- Very Low Power Consumption
Running costs are greatly reduced as a dust collector is no longer required. Air consumption can be further reduced by using a pulse blow
- Easy Maintenance
Dust is collected on a self-adhesive urethane gel sheet.Simply wash the sheet off with water to restore the adhesiveness.
- Adjustable Ionizing Blow Time
Easily adjust the time to stop the ionizing blow after the sensor detecets the workpiece (1/2/5/10/30 seconds)
|

 |
|
|
|
|
Specifications
Dust Collection Method |
Polyurethane Gel Sheets |
Applied Voltage |
AC 6.0kV (p-p) |
Input Voltage / Current Consumption |
DC 24V ±5%, 700mA |
Power Consumption |
17 W |
Applied Fluid |
0.1 MPa to 0.3MPa (use clean air) |
Air Supply Hose Diameter |
6mm x 4mm |
Ionizer Blowing Modes |
Continuous High-Frequency Pulse: Cycle Length: 100msec, Pulse Width: 40msec Low-Frequency Pulse: Cycle Length: 250msec, Pulse Width: 100msec |
Off-Timer Settings |
1, 2, 5, 10, 30 seconds (set by DIP switch) |
Ozone Generation |
Less than 0.05ppm (measured 50mm from device) |
Operating Temperature and Humidity |
5°C to 40°C, 35% to 65% RH (non-condensing) |
Noise |
86.5 db (A) (o.3 MPa, Continuous mode, 1m distance in front position) |
Weight |
6.0kg |
Accessories |
Power Supply Transformer: Input: 100 to 240VAC , Output: 24VDC Mounting Bracket for N-2 Ionizer Electrode needle Replacement Screwdriver |
Dimensions

Flyer & Manual
Required to view Product Flyer