Description
- 12" (300mm) Flexible Tube To Direct Nozzle For Effective Static Neutralization
- Pin-Point Static Electricity Removal Even In Difficult To Reach Locations
- Powerful Removal of Dust and Static Electricity
- Low-Wear Tital Electrode Needle Enhances Ionizing Performance
- High-Voltage Shielded Cable Reduces Interference From Electrical Noise
- Titanium Electrode Needle (Discharge Electrode)
- Silicon Shielded Cable for High Voltage
- Ion Balance Circuit
(High Voltage Power Supply Unit GP-1 4kV)
- Safety Circuit / Anomaly Detection Circuit
(High Voltage Power Supply Unit GP-1 4kV)
Specifications
| Model Number (EDP #) |
HPF-1 (623048) |
| Ionizing Method / Applied Voltage |
AC corona discharge / 3.5kV and 50/60Hz (adjusted on GP-1 4kV) |
| Power Supply |
DC 24V ±10% |
| Ion Balance |
Adjustable on GP-1 4kV (charged plate monitor or equivalent is required) |
| Decay Time |
Within 1 sec approx. (43.5psi/0.3MPa at 6"/150mm) [measured values] |
| Air Pressure / Operating Fluid |
14.5psi to 101.7psi MAX (0.1-0.7MPa), Clean Dry Air
More than MAX pressure may cause serious risk of damage to body and parts |
| Operating Range |
1.97" to 11.81" (50mm to 300mm) between charged item and discharge tip of gun |
| Dimensions (LxHxD) |
See DIMENSIONS tab |
| Estimated Weight |
1.52 lbs (0.69kgs / 690g) including 3m cable and high-pressure connector |
| Termination Connector |
CON-4 high-pressure connector |
| Air Supply Hose Diameter |
Ø6mm Tube Fitting, One-touch joint |
| Air Consumption |
5.3 ft/m3 (150L/min @ 0.3MPa) approx |
| Noise Level |
95dBA (43.5psi / 0.3MPa) |
| Working Temp Range |
41-113°F (5 - 45°C) |
| Working Humidity Range |
10~80% RH (non-condensing, non-freezing) |
| Operating / Warning Indicators |
GP-1 4kV high-voltage power supply provides high-voltage anomaly detection function and automatic stop circuit |
| Materials |
Nozzle Tip: SUS304
Electrode Needle: Titanium
Insulation: Fluoresin
Flexible Tube: Chrome plated steel
Air Branch Unit: Aluminum |
| High-Voltage Cable |
9.8ft (3m) silicon shielded cable |
| Markings |
CE, RoHS |
| Country of Origin |
Japan |
