N-3
621654
Pinpoint Compact Ionizing Nozzle (3.7”L x 1.3”W x 1.8”H)

Very Compact / Low Profile Design
(Only 3.74” Long, 1.34” Wide, 1.77” High)
Compact, lightweight plastic body incorporates mounting screw holes.  Air inlets located on both sides of the body.

• Ideal for space restricted areas
• Light enough to mount onto auxiliary equipment, end-of-arm-tooling, etc.

LED Indicator Detects Operating Status
Part of top cover glows “GREEN” during operation and “RED” when stopped due to a malfunction.

• Operators can visually see operating status at all times
• LED is very visible across room so operators can quickly and easily see operating status at all times

Safety Design for H.V. Malfunction
Stops automatically in the event of a high-voltage malfunction. Device includes an alarm output terminal.

• Helps prevent the unit from being damaged
• Alarm output can communicate information to external equipment

Very Accurate Ion Balance ± 10V
(6” from surface, 43.5psi, w/standard nozzle)

• Quick decay time less than 0.7 seconds
• Can blow off dust, debris, and contaminant particles effectively at a high air pressure

Connect Multiple Units Together
Power can be supplied to multiple units by daisy-chaining them together

• Only one power source needed for multiple units, which reduces cost
• Makes installing multiple units easy which saves valuable time

Easy Maintenance
Electrode needles can be easily cleaned and replaced by operator using electrode needle removal tool (G-7DR).

• Prevents maintenance downtime
• Very user-friendly to change part in seconds

Different Nozzles for Different Applications
Ships standard with three nozzles for use in a variety of applications. (standard, tube fitting, and flared nozzle)

• Adaptable for multiple applications
• Tube fitting nozzle can be used to clean and ionize inside plastic bottles, sheet fed presses, and other space restricted areas

Optional Shower Tube (N-2C6B)
Can be connected to a freely bendable shower tube (sold separately).

• Helps ionize a wider area
• Bendable to adapt in space restricted areas such as inside plastic bottles, on top of hoppers, inside molding machines, conveyers, fixtures, film winders, sheets of plastic material, etc.

CE / RoHS Approved
Designed and manufactured in compliance with EU standards, all tests are carried out in compliance with the principles of the EMC Directive

• Ensures customer that they are using high quality product that carries CE and RoHS markings

G-7FN

Flared Nozzle
Used to increase the effective area of the N-2

G-7TN (#806085)

Tube Adapter Nozzle
Used to attach a tube for ionizing hard to reach areas such as inside a bottle or container

N-2WN (#8060687)

Silent Nozzle
Audible Noise is Reduced 10dB
(down 25% from Flared Nozzle)

GN-H (#806124)

Electrode Needle

N-2C6B (#621706)
Shower Tube Nozzle 

*Use with N-2TN Tube Fitting Nozzle

• Flexible and handy for many applications
• Easy to install in a limited space
• Effective countermeasure against static accumulation