New JAWSFIT Tip Design:
The 900JF and 930JF series feature a new JAWSFIT cross-point tip design. Small projections on the blade edges allow the tip of the screwdriver to "BITE" firmly into the screw head, reduce pressing force, prevent driver tip damage, and help prevent cam-out. Applications include construction, automotive, industrial use, general fastening, and more.
NOTE: The 900JF and 930JF JAWSFIT feature is not intended to be used when working with soft or plated screws, and may not be suitable for restoration work.
The MEGADORA models are equipped with the most advanced triple-molded handle for comfort. The corners of the hexagonal cross-section are molded with elastomer for a soft fit and high torque transmission.
The Tang-Thru handle features a shank that goes through the handle and connects to a large metal end cap. This allows the operator to strike the handle with a hammer without damaging the screwdriver handle, making them excellent go through screwdrivers, demolition screwdrivers, and striking screwdrivers.
Other features include a fully hardened chrome vanadium steel shank, magnetized high-precision black point tips, and a bolster so that it can be turned with a wrench for additional torque while tightening or loosening
These rugged screwdrivers are designed for professional use such as automotive repair and maintenance, electrical work (e.g. to remove “knock-outs” in electrical panels), construction, industrial work, and general fastening applications.
|Part No.||EDP No.|
|930JF P1x75||125715JF||+ No. 1||75||5.5||30||176.0|
|930JF P2x100||125716JF||+ No. 2||100||6.4||34||213.0|
|930JF P2x150||125717JF||+ No. 2||150||6.4||34||263.0|
|930JF P3x150||125718JF||+ No. 3||150||8.0||36||278.0|
|930JF P1*75||+1 Cross-Point Tip, 75mm Shaft Length||
|930JF P2*100||+2 Cross-Point Tip, 100mm Shaft Length||
|930JF P2*150||+2 Cross-Point Tip, 150mm Shaft Length||
|930JF P3*150||+3 Cross-Point Tip, 150mm Shaft Length||