Description
|
Key Features:
- Compact, low-profile, and lightweight design
- Ideal for mounting on end of arm tooling or gate-cutting equipment
- A wide selection of premium forward or reverse cutting blades sold separately
- Cutting capacity up to ᴓ3mm soft plastic or ᴓ1mm steel
- Mounting holes on three surfaces of the housing
- Single action with spring return
- Weight: 101g
|
The VESSEL GT-NF05 is an exceptional fixed-type horizontal air nipper for mounting on end of arm tooling (EOAT) or on automated gate-cutting stations due to its compact, low-profile, and lightweight design. The GT-NF05 air nipper body is the same as the GT-NY05-4 model but without the slide bracket. This stationary air nipper requires the NY05 series cutting blades.
Specifications
 |
Model
No. |
Air
Consumption
(cm3/str.) |
Air
Pressure
(MPa) |
Weight
(g) |
Air Hose
Nipple Ø |
EDP
No. |
| GT-NF05 |
43 |
0.4~0.5 |
101 |
ID: 2.5mm
OD: 4mm |
360606 |
| |
|
0.4MPa = 58.02psi / 0.5MPa = 72.5psi |
| |
Capacity (ᴓ) mm |
Model
No. |
Soft
Plastic
|
Hard
Plastic |
Copper |
Steel |
Piano |
Solderless
Terminals |
| GT-NF05 |
3.0 |
2.0 |
1.6 |
1.0 |
- |
- |
| |
*Steel: Non-heat treated / Piano: HV320 or below |
|
The capacity in the above table is given for reference only, when mounting a standard type of blade. The capacity depends on the blade shape and the material of the object to cut. Capacity (ᴓ) is for reference purposes only as it varies depending on products.
Air hose inner diameter is 5mm and the overall length and weight does not include accessories.
