JDV Products, Inc.

201-796-1720

sales@vesseltools.com

P-20A
360055
VESSEL Extra Pressure Booster for GT-NR20A

Manufacturer VESSEL PrintEmail
VESSEL Extra Pressure Booster for GT-NR20A
Helpful Links
Vessel Nipper Catalog
User's Manual
PDF Drawing
2D Drawing
3D Drawing

COMING FEBRUARY 2024

For Use With      
GT-NR20A Nipper      
GT-NR20A
Round Body Nipper
     


Key Features:

  • Provides boost of air pressure in case of low air supply
  • Helps increase the VESSEL air nipper body’s cutting force
  • Cutting capacity up to ᴓ9mm soft plastic or ᴓ2.4mm steel
  • Easy to install on a VESSEL GT-NR20A round body air nipper
  • Cylinder: ᴓ45mm x 87mm (ᴓ1.77” x 3.43”)
  • Weight: 164g (0.36lbs)

VESSEL’s model P-20A air pressure booster (or intensifier) can be used to attain the recommended air pressure for VESSEL air nippers in case a facility has low air pressure supply. It can also be used to increase the applied cutting force for standard VESSEL air nippers. Applicable models include: GT-NR20A.

These intensifiers are easy to install in between the air nipper housing and end cap. Simply remove the nipper end cap, screw the air booster onto the bottom of the nipper housing, and reattach the nipper end cap to the bottom of the air booster housing. When installing an air booster on a handheld air nipper, a longer safety lever throttle may be needed. The booster is to be used in case the originally required pressure is not obtainable by the limit of space and air pressure. Please contact JDV for more details.

Part No. For Use With Nippers OAL
(mm)
Diameter
(mm)
Air Consumption
(cm3)
Air Pressure
(psi)
Weight
(g)
  Cut Capacity (mm)
  Soft Plastic Hard Plastic Copper Steel
P-20A GT-NR20A  87 45 538 Up to 72.5 164   9.0 6.5 3.4 2.6

Join our newsletter to receive new product notifications and alerts for upcoming sales!