p_booster1 pressure_boosters_nippers7

VESSEL #P-50 Extra Pressure Booster

Manufacturer VESSEL PrintEmail

Retail price $431.00
Helpful Links
Vessel Nipper Catalog
User's Manual
For Use With      
GT-N Series Nippers GT-NR Series Nippers GT-NR Series Nippers  
Hand-Held Nippers
Round Body Nippers
Round Body Nippers

Key Features:

  • Provides boost of air pressure in case of low air supply
  • Helps increase the VESSEL air nipper body’s cutting force
  • Cutting capacity up to ᴓ5.5mm copper or ᴓ4.5mm steel
  • Easy to install on a VESSEL round, square, or handheld air nipper body
  • Cylinder: ᴓ75mm x 133mm (ᴓ2.95” x 5.24”)
  • Weight: 840g (1.85lbs)

VESSEL’s model P-50 air pressure booster (or intensifier) can be used to attain the recommended air pressure for VESSEL air nippers in case a facility has low air pressure supply. It can also be used to increase the applied cutting force for standard VESSEL air nippers. Applicable models include GT-N50/SL, GT-NR50, and GT-NR50F.

These intensifiers are easy to install in between the air nipper housing and end cap. Simply remove the nipper end cap, screw the air booster onto the bottom of the nipper housing, and reattach the nipper end cap to the bottom of the air booster housing. When installing an air booster on a handheld air nipper, a longer safety lever throttle may be needed. The booster is to be used in case the originally required pressure is not obtainable by the limit of space and air pressure. Please contact JDV for more details.

Part No. For Use With Nippers OAL
Air Consumption
Air Pressure
  Cut Capacity (mm)
  Soft Plastic Hard Plastic Copper Steel
P-50 GT-N50/SL / GT-NR50  133 75 2670 Up to 58 840       6.5 5.5